79. How to Setup Mikrotik Router as Failover on two Connections

Backup Config:

# aug/13/2016 04:45:34 by RouterOS 6.36
# software id = HWST-40J4
/interface bridge
add name=bridge-LAN
/interface ethernet
set [ find default-name=ether1 ] name=ether1-ISP1
set [ find default-name=ether2 ] name=ether2-ISP2
set [ find default-name=ether3 ] name=ether3-LAN
set [ find default-name=ether4 ] name=ether4-LAN
set [ find default-name=ether5 ] name=ether5-LAN
/interface bridge port
add bridge=bridge-LAN interface=ether3-LAN
add bridge=bridge-LAN interface=ether4-LAN
add bridge=bridge-LAN interface=ether5-LAN
add bridge=bridge-LAN interface=wlan1
/ip address
add address= interface=ether1-ISP1 network=
add address= interface=ether2-ISP2 network=
add address= interface=bridge-LAN network=
/ip dns
set servers=,
/ip firewall nat
add action=masquerade chain=srcnat log-prefix=""
/ip route
add distance=1 gateway=
add distance=10 gateway=
/system routerboard settings
set cpu-frequency=360MHz

You can contact me: plus.google.com/+PhallaCCMT; youtube.com/phallaccmt; facebook.com/Phalla.CCMT; twitter.com/PhallaCCMT and Phalla.CCMT@gmail.com
Next Post »


Write comments